User Manual

•
Excluded member: By default, the selection is blank, which means that the port
is excluded from the VLAN. A port that is excluded can still be dynamically added
to the VLAN through GVRP.
9.
In the LAG table, click a LAG once, twice, or three times to configure one of the
following modes:
•
T (tagged) member: The LAG is added as a tagged member of the VLAN.
•
U (untagged) member: The LAG is added as an untagged member of the VLAN.
•
Excluded member: By default, the selection is blank, which means that the LAG
is excluded from the VLAN. A LAG that is excluded can still be dynamically added
to the VLAN through GVRP.
10. Click the Apply button.
Your settings are saved.
11.
To save the settings to the running configuration, click the Save icon.
The following table describes the nonconfigurable fields on the page.
Table 52. Advanced VLAN Membership
DefinitionField
The name for the VLAN.VLAN Name
The type of the VLAN you selected:
•
Default (VLAN ID = 1): Always present.
•
Static: A VLAN that you added manually.
•
Dynamic: A VLAN that was created through GVRP registration and that you did not
convert to static, and that GVRP can therefore remove.
VLAN Type
View the VLAN status on the switch
You can view the status of all configured VLANs.
To view the VLAN status on the switch:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
Main User Manual201Configure Switching Information
AV Line of Fully Managed Switches M4250 Series Main User Manual