User Manual

6.
From the Interface menu, select an interface on which the transmission of LLDP
frames is enabled.
7.
To refresh the page, click the Refresh button.
The following table describes the nonconfigurable fields on the page.
Table 42. LLDP local device information
DescriptionField
The switch identifier is the MAC address of the switch (see the following
field).
Chassis ID Subtype
The MAC address of the switch.Chassis ID
The port identifier is the MAC address of the interface (see the following
field).
Port ID Subtype
The MAC address of the interface on the switch.Port ID
The system name, if any, of the switch.System Name
The description of the switch.System Description
The interface name, if any, of the interface on the switch.Port Description
The system capabilities of the switch.System Capabilities Supported
The system capabilities of the switch that are enabled.System Capabilities Enabled
The type of the management IP address of the switch.Management Address Type
The advertised management IP address of the switch.Management Address
Display LLDP remote device information
You can display LLDP remote device information, which is information that the device
that is connected to an interface advertises.
To display LLDP remote device information:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
Main User Manual167Configure Switch System
Information
AV Line of Fully Managed Switches M4250 Series Main User Manual