User Manual

•
Other: The UDP Port Other Value field becomes available so that you can enter
a custom UDP port number.
• dhcp: Relay DHCP (UDP port 67) packets.
• domain: Relay DNS (UDP port 53) packets.
• isakmp: Relay ISAKMP (UDP port 500) packets.
• mobile-ip: Relay Mobile IP (UDP port 434) packets
• nameserver: Relay IEN-116 Name Service (UDP port 42) packets
• netbios-dgm: Relay NetBIOS Datagram Server (UDP port 138) packets
• netbios-ns: Relay NetBIOS Name Server (UDP port 137) packets
• ntp: Relay network time protocol (UDP port 123) packets.
• pim-auto-rp: Relay PIM auto RP (UDP port 496) packets.
• rip: Relay Routing Image Protocol (RIP) (UDP port 520) packets
• tacacs: Relay TACACS (UDP port 49) packet
•
tftp: Relay TFTP (UDP port 69) packets
• time: Relay time service (UDP port 37) packets
9.
If you select Other from the UDP Port menu, enter a custom UDP port number in
the UDP Port Other Value. field.
The port number can be in the range from 0 to 65535.
10.
From the Discard menu, select if packets that match the condition are dropped:
•
Enable: The packets are dropped. This selection functions only is you enter 0.0.0.0
as the server IP address.
•
Discard: The packets are not dropped. This selection functions if the server IP
address is not 0.0.0.0.
11. Click the Add button.
The UDP interface configuration is added.
The Hit Count field displays the number of UDP packets that are detected on the
UDP interface.
12.
To save the settings to the running configuration, click the Save icon.
Change a UDP interface configuration
To change a UDP switch configuration:
1. Launch a web browser.
2.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. Click the Main UI Login button.
Main User Manual122Configure Switch System
Information
AV Line of Fully Managed Switches M4250 Series Main User Manual