User Manual

5.
Select System > Services > DHCP Server > DHCP Pool Configuration.
6. From the Pool Name menu, select Create.
The Pool Name field displays.
7.
In the Pool Name field, type a name for the new pool.
The name can be up to 31 characters in length.
8.
Select the type of binding for the pool:
•
Unallocated: No further configurations are required. Continue with the next step.
•
Dynamic: Configure the following settings:
•
Network Address. The subnet IP address for the dynamic DHCP pool.
•
Network Mask: The network mask for the dynamic DHCP pool.
•
Network Prefix Length: The subnet number for the dynamic DHCP pool. The
range is from 0 to 32.
Main User Manual103Configure Switch System
Information
AV Line of Fully Managed Switches M4250 Series Main User Manual