User Manual

(Continued)
DescriptionField or Graph
The management IP address for access to the main UI or AV UI over any Ethernet
network port of the switch.
Management IP Address
The configured STP bridge priority of the switch (see Set the STP bridge priority for
the switch on page 59).
Bridge Priority
Configured Profiles
For more information about network profiles, see Network profiles on page 14.
The name of the network profile.Profile Name
The profile template on which the network profile is based.
The profile template can be any of the preconfigured profile template ( for example,
Data or Video, see Overview of preconfigured AV profile templates on page 13) or
a custom profile template (see Custom AV profile templates on page 19).
Profile Type
The VLAN ID that is assigned to the network profile.VLAN ID
The IP address that is assigned to the network profile.IP Address
The number of ports that are assigned to the network profile.# of Assigned Ports
The CPU utilization as a percentage of the CPU capacity.CPU Utilization
The memory utilization as a percentage of the total memory.Memory Utilization
Fans & Temperature
The state of each fan, which must be Active. If the state is not Active, a problem
might be occurring with the fans and the cooling.
Fan 1 and Fan 2
The temperature in Celsius that is measured by the first sensor.Sensor-1 Temperature
The temperature in Celsius that is measured by the second sensor. (The number of
internal sensors depends on the model.)
Sensor-2 Temperature
Audio Video User Manual65Manage and Monitor the Switch
AV Line of Fully Managed Switches M4250 Series