User Manual
Table Of Contents
- Contents
- 1. Getting Started with the AV UI
- 2. Audio-Video Profile Templates and Network Profiles
- 3. Link Aggregation
- 4. Power over Ethernet
- 5. Security
- 6. Manage and Monitor the Switch
- Licenses
- Update the firmware
- Startup configuration
- Date and time settings
- Add a system name
- Set the STP bridge priority for the switch
- Restart the switch from the AV UI
- Reset the switch to factory default settings
- Manually control the fans
- Display the status of the ports and switch
- Display the neighboring devices
- 7. Diagnostics and Troubleshooting
Revision History
CommentsPublish DatePublication Part
Number
We added the following chapters:
Security on page 43
Diagnostics and Troubleshooting on page 67
We added the following sections to existing chapters:
Auto-Trunk overview on page 23
Enable or disable Auto-Trunks on page 24
Auto-LAG overview on page 27
Enable or disable Auto-LAGs on page 28
Configure the hash mode for Auto-LAGs on page 28
Save the running configuration on page 54
Download the running configuration on page 55
Restore the configuration on page 56.
Set the STP bridge priority for the switch on page 59
Display the status of the ports and switch on page 63
Display the neighboring devices on page 66
We changed the following sections:
Supported Switches on page 7
Use an AV profile template to configure and assign a network profile on
page 15
Create a custom AV profile template on page 19
Manage PoE interface settings on page 34
Save the running configuration on page 54
March 2021202-12148-03
We added the following chapters:
Link Aggregation on page 26
Power over Ethernet on page 33
We added a DHCP server option to Use an AV profile template to
configure and assign a network profile on page 15.
November 2020202-12148-02
First publication.September 2020202-12148-01
3
AV Line of Fully Managed Switches M4250 Series