User Manual
Table Of Contents
- Contents
- 1. Getting Started with the AV UI
- 2. Audio-Video Profile Templates and Network Profiles
- 3. Link Aggregation
- 4. Power over Ethernet
- 5. Security
- 6. Manage and Monitor the Switch
- Licenses
- Update the firmware
- Startup configuration
- Date and time settings
- Add a system name
- Set the STP bridge priority for the switch
- Restart the switch from the AV UI
- Reset the switch to factory default settings
- Manually control the fans
- Display the status of the ports and switch
- Display the neighboring devices
- 7. Diagnostics and Troubleshooting
6
Manage and Monitor the Switch
You can manage the firmware of the switch, set the switch to factory defaults, and activate
a new AVB license. You can also display the switch logs.
The chapter contains the following sections:
• Licenses
• Update the firmware
• Startup configuration
• Date and time settings
• Add a system name
• Set the STP bridge priority for the switch
• Restart the switch from the AV UI
• Reset the switch to factory default settings
• Manually control the fans
• Display the status of the ports and switch
• Display the neighboring devices
For information about all management and monitoring options of the switch, see the
main user manual, which you can download by visiting netgear.com/support/download.
50