Product Datasheet

PAGE 7 of 57
AV Line Managed Switches
Datasheet | M4250 series
AV Line Managed Switches
NETGEAR M4250 series key features:
• Rangesfrom8to48portswithavariety
of PoE+ and Ultra90 PoE++ options for
15.4W, 30W, 60W, 75W and 90W
AVoIP endpoints
• Uplinkoptionsinclude1Gforaudio
installations or standalone video
installations as well as 10G uplinks
for larger scale video deployments
• Alsoincludes12-portmulti-gigabit
Ethernet and 16-port 1G/10G fiber
models for plug and play aggregation
in a star topology
• Designedforacleanintegrationwith
traditional, rack-mounted, AV equipment
• TheM4250switchescomewithasleek,
black display panel with status in front
and all cabling plus additional status in
the back
• Reversedmountingispossiblewhen
ports are desired on the front of the
rack
• Asecondpairofrackmountearsallows
the switches to be mounted recessed
by 2-inches to allow for the cabling
• Software-controlledfanadjustments
enable the fans to be turned off when
ambient temperature and PoE loads are
appropriate for a totally fanless operation
• Threadedholesonthebottom(4xM5
 for50x100mmVESA)andinfront
 (1xM10forclamps)allowforuniversal
mounting options outside the rack as well
NETGEAR M4250 series AV software
features:
• Pre-conguredforaudioandvideo
over IP out of the box, the M4250
switches enable encoders and
decoders to be connected with zero
configuration
• Whenmorecongurationisrequired,
an AV web-based GUI is available
• Thisinterfacehasbeenspecially
designed for AV installers with specific
AV-related controls made more
accessible and with port-based profiles
• Foraudio,prolesforDante,Q-SYS
and AES67 are built-in, as well as an
 AVBprole(AVBlicensesoldseparately)
• Forvideo,theM4250offersprolesfor
NVX, SVSI, Q-SYS, NDI, Kramer KDS,
Aurora Multimedia, ZeeVee, Atlona,
Dante and SDVoE
• OtherAVCODECsandmanufacturers
are supported as well as audio/video/
control mixed profiles
• Tofurthersimplifystardeployments,
NETGEAR IGMP Plus
™
brings multicast
automation between all M4250
switches, and with M4300/M4500
• WithAuto-TrunkandAuto-LAG,simply
connect M4250 switches together and
you are done!
NETGEAR M4250 series other software
features:
• AllM4250switchessharethesame
high-end NETGEAR Layer 2 / Layer 3
switching engine for a consistent
experience
• AllswitchesintheM4250serieshave
another main, IT web-based GUI for
midsize Enterprise campus networks,
IoT and IPTV
The NETGEAR AV Line M4250 series was designed with input from AV Professionals. The result is a line of switches built from the
ground up to support 1Gb audio and video over IP with customized hardware and software along with dedicated service and support.
Product Brief