Manualshelf

User Manual

ManualsBrandsNETGEAR ManualsComputers & AccessoriesNETGEAR Port Gigabit Ethernet Unmanaged Switch
51525354555657585960
The HOME page displays.
4. From the menu at the top of the page, select SWITCHING.
The QOS page displays.
5. From the menu on the left, select VLAN.
The VLAN page displays.
If you did not yet activate the Advanced 802.1Q VLAN mode, see Activate the Advanced 802.1Q VLAN
Mode on page 51.
6. In the table in the right pane, click the VLAN that you want to make the voice VLAN (you can click
anywhere in the row for the VLAN).
7. Click the EDIT button.
8. In the Voice VLAN section, click the button so that the button bar display green.
The VLAN is selected to be set as the voice VLAN.
9. From the Class of Service menu, select a CoS value.
A value of 0 is the lowest priority and a value of 7 is the highest priority. The default value is 6.
For information about viewing and changing the OUI settings, see Change the OUI Table for the Voice
VLAN on page 56.
10. Click the APPLY button.
Your settings are saved. The voice VLAN shows in the Advanced 802.1Q VLAN pane with a telephone
icon.
Change the OUI Table for the Voice VLAN
For the voice VLAN, the switch supports default Organizationally Unique Identifiers (OUIs), which are
associated with VoIP phones of specific manufacturers. All traffic received on voice VLAN ports from VoIP
phones with a listed OUI is forwarded on the voice VLAN.
You can add, change, and remove OUIs, including the default OUIs. The maximum number of OUI entries
in the table is 15.The first 3 bytes of the MAC address contain a manufacturer identifier, and the last 3 bytes
contain a unique station ID.You must add an OUI prefix in the format AA:BB:CC.
You can add a new OUI, change an existing OUI, and delete an OUI that you no longer need.
To change the OUI table for the voice VLAN:
1. Open a web browser from a computer that is connected to the same network as the switch or to the
switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4. From the menu at the top of the page, select SWITCHING.
Use VLANS for Traffic Segmentation
56
Nighthawk S8000 Gaming & Streaming Advanced 8-Port Gigabit Ethernet Switch (GS808E)