User Manual

6. In the right pane, click the ADD VLAN button.
The Advanced 802.1Q VLAN pane displays.
7. Specify the VLAN settings and assign ports as tagged or untagged members:
a. In the VLAN Name field, enter a name from 1 to 14 characters.
b. In the VLAN ID field, enter a number from 1 to 4094.
c. Select the port tags and whether ports are members of the VLAN through a combination of the
following actions:
• Click the T button for an individual port to make the port a tagged member of the VLAN.
• Click the U button for an individual port to make the port an untagged member of the VLAN.
• Click the E button for an individual port to exclude the port from the VLAN.
• Click the Tag All link to make all ports tagged members of the VLAN.
• Click the Untag All link to make all ports untagged members of the VLAN.
• Click the Exclude All link to exclude ports from the VLAN.
If ports are members of the same LAG, you must assign them to the same VLAN.Note
8. Click the APPLY button.
Your settings are saved. The new VLAN shows in the Advanced 802.1Q VLAN pane.
Change an Advanced 802.1Q VLAN
You can change the settings for an existing advanced 802.1Q VLAN.
To change an advanced 802.1Q VLAN:
1. Open a web browser from a computer that is connected to the same network as the switch or to the
switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4. From the menu at the top of the page, select SWITCHING.
The QOS page displays.
5. From the menu on the left, select VLAN.
The VLAN page displays.
Use VLANS for Traffic Segmentation
53
Nighthawk S8000 Gaming & Streaming Advanced 8-Port Gigabit Ethernet Switch (GS808E)