System information

88 | Chapter 3: Configuring Stacking Switches
GS752TXS Smart Switch Software Administration Manual
Stack Firmware Synchronization
To display the stack firmware synchronization configurations from the Stack Firmware
Synchronization page, click System
 Stacking  Advanced  Stack Firmware
Synchronization. A screen similar to the following displays.
1. Use the Stack Firmware Auto Upgrade field to enable or disable the Stack Firmware
Synchronization feature.
2. Use the Traps field
to enable or disable sending of traps during Stack Firmware
Synchronization Start, Failure, or Finish.
3. Use the Allow Downgrade field to enable or disable Downgrading the image on stack
member if the stack members version is newer.
4. Click Refresh to update the page with the latest information from the switch.
5. Click Apply to apply the new settings to the switch. Configuration changes take effect
immediately.