System information

Field Description
Hardware Management Preference The hardware management preference of the switch.
The hardware management preference can be
disabled or unassigned.
Standby Status Identifies the switch that is configured as the Standby
Unit. The possible values are:
• Cfg Standby - Indicates that the unit is configured
as the Standby Unit. The unit configured as the
Standby switch becomes the stack manager if the
current manager fails.
• Opr Standby - Indicates that this unit is operating
as the Standby Unit and the configured Standby
Unit is not part of the stack.
• None - The switch is not configured as the
Standby Unit.
Switch Status Displays the status of the selected unit. The possible
values are:
• OK
• Unsupported
• Code Mismatch
• Config Mismatch
• Not Present
Chapter 3: Configuring Stacking Switches | 85
GS752TXS Smart Switch Software Administration Manual
The following table describes the Basic Stack Status fields.
Field Description
Unit ID The unit ID of the specific switch.
Switch Description The description for the unit can be configured by the
user.
Serial Number The unique box serial number for this switch.
Uptime The displays the relative time since the last reboot of
the switch.
Preconfigured Model Identifier This field displays the model type assigned by the
device manufacturer to identify the device.
Plugged-in Model Identifier This field displays the model type assigned by the
device manufacturer to identify the plugged-in
device.
Expected Code Type This field indicates the expected code type on this
unit.
Detected Code Version This field indicates the detected version of code on
this unit.