System information

78 | Chapter 2: Configuring System Information
GS752TXS Smart Switch Software Administration Manual
To configure DHCP binding settings:
1. For DHCP Snooping Static Binding Configuration, in the Interface field, select the
interface to add a binding into the DHCP snooping database.
2. In the MAC Address field, specify the MAC address for the binding to be added. This is the
Key to the binding database.
3. In the VLAN ID field, select the VLAN from the list for the binding rule. The range of the
VLAN ID is (1 to 4093).
4. In the IP Address field, specify a valid IP Address for the binding rule.
5. Click Add to add the DHCP snooping binding entry into the database.
6. Click Delete to delete the selected static entries from the database.
7. Click Clear to delete all DHCP Snooping binding entries.
8. Click Refresh to refresh the data on the screen with the latest DHCP Snooping Dynamic
Binding information.
9. Click Apply to apply the change to the system. Configuration changes take effect
immediately.
10. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
For DHCP Snooping Dynamic Binding Configuration, the Interface field displays the
interface to which a binding entry in the DHCP snooping database.
The MAC Address field displays the MAC address for the binding in the binding database.
The VLAN ID field displays the VLAN for the binding entry in the binding database. The range
of the VLAN ID is 1 to 4093.
The IP Address field displays the IP Address for the binding entry in the binding database.