System information

58 | Chapter 2: Configuring System Information
GS752TXS Smart Switch Software Administration Manual
• Green Features supported on this unit - This shows the which feature(s) are
supported on this unit.
• Interface - Use this to select the interface to be displayed or configured.
• Energy Detect Admin Mode - Select Enable or Disable to enter Energy Detect
Admin Mode.
• Energy Detect Operational Status - This shows if the Energy Detect Operational
Status is either Active or Inactive.
• Short Reach Admin Mode - Select Enable or Disable to enter Short Reach Admin
Mode.
• Short Reach Operational Status - This shows if the Short Reach Admin Mode is
either Active or Inactive.
• EEE Admin Mode - Select Enable or Disable to enter EEE Admin Mode.
2. Click Refresh to refresh the page with the most current data from the switch.
Green Ethernet LPI History
Use this page to configure Green Ethernet LPI History feature. Viewing the Green Ethernet
LPI History feature allows you to view the Green Ethernet history of each stack.
To access this page, click System  Management  Green Ethernet  Green Ethernet LPI
History.
1. In the Port GreenMode EEE History section, view or select the following:
• Interface - Use this to select the interface to be displayed or configured.
• Sampling Interval - 36000 (30 to 36000)
• Max Samples to keep - 168 (1 to 168)