System information

56 | Chapter 2: Configuring System Information
GS752TXS Smart Switch Software Administration Manual
• Cumulative Energy Saved on this port due to Green Mode(s) (Watts * Hours) -
This shows the energy savings per port, per hour.
• Energy Detect Admin Mode - Select Enable or Disable to enter this mode.
• Operational Status - This shows the Green Mode operational status, either Inactive
or Active.
• Reason - This shows the Admin status, either Admin Down or Admin Up.
• Short Reach Admin Mode - Select Enable or Disable enter Short Reach Admin
Mode.
• Operational Status - This shows the operational status of the port, either Active or
Inactive.
• Reason - This shows the reason why the port is either Active or Inactive.
• EEE Admin Mode - Select Enable or Disable to enter EEE Admin Mode.
• Rx Low Power Idle Event Count - This shows the Rx Low Power Idle Event count on
the port.
• Rx Low Power Idle Duration (uSec) - This shows the Rx Low Power Idle Event
count on the port.
• Tx Low Power Idle Event Count - This shows the Tx Low Power Idle Event count on
the port.
• Tx Low Power Idle Duration (uSec) - This shows the Tx Low Power Idle duration on
the port.
• Tw_sys_tx (uSec) - This shows the time duration the Tx_sys_tx present on the port.
• Tw_sys_tx Echo (uSec) - This shows the time duration the Tw_sys_tx Echo present
on the port.
• Tw_sys_rx (uSec) - This shows the time duration the Tw_sys_rx present on the port.
• Tw_sys_rx Echo (uSec) - This shows the time duration the Tw_sys_rx Echo present
on the port.
• Fallback Tw_sys (uSec) - This shows the time duration the Fallback Tw_sys present
on the port.
• Tx_dll_enabled - This shows if the Tx_dll is enabled, select either Yes or No.
• Tx_dll_ready - This shows if the Tx_dl is ready, select either Yes or No.
• Rx_dll_enabled - This shows if the Rx_dll is enabled, select either Yes or No.
• Rx_dll_ready - This shows if the Rx_dll is ready, select either Yes or No.
• Time Since Counters Last Cleared - This shows time since this port was last
cleared.
2. View or select the following Remote Device Information:
• Interface - If local interfaces are enabled to receive LLDP data, this allows you to
select the remote device and retrieve port information.
• Remote ID - This shows if remote ID.
• Remote Tw_sys_tx (uSec) - This shows the time duration of the Remote Tw_sys_tx
on the port.