System information

Chapter 9: Maintenance | 281
GS752TXS Smart Switch Software Administration Manual
For information about how to update or change the system images, see File Management on
page 279.
Dual Image Configuration
The system running a legacy software version will ignore (not load) a configuration file
created by the newer software version. When a configuration file created by the newer
software version is discovered by the system running an older version of the software, the
system will display an appropriate warning to the user.
Use the Dual Image Configuration page to set the boot image, configure an image
description, or delete an image.
To display the Dual Image Configuration page, click Maintenance > File Management > Dual
Image > Dual Image Configuration.
To configure Dual Image settings:
1. In the Unit Number field, select the unit whose code image you want to activate,
update, or delete.
2. In the Image Name field, select one of the images from the list.
The Current-active field displays the name of the active image.
3. To configure a descriptive name for the selected software image, type the name in the
Image Description field.
Stack Member Select the destination unit to which you are going to copy from master.
Destination Image
Select image1 or image2 as the destination image.
Field Description