System information

280 | Chapter 9: Maintenance
GS752TXS Smart Switch Software Administration Manual
• Copy on page 280
Copy
You can use the Copy page to view information about the system images on the device.
To display the Dual Image Status page, click Maintenance > File Management > Copy.
1. Select the source image.
The Source Image field displays the name of the active image.
2. Select the Source Image
Select the destination unit to which you are going to copy from the master.
3. Select the Stack Member
This is the stack member that will be copied from the master image.
4. Select the Destination Image.
This is the location for the copied image to reside.
5. Click Cancel to cancel the configuration on the screen. Reset the data on the screen to the
latest value of the switch.
6. Click Apply to apply the settings to the switch.
The following table describes the information on the Copy page.
Field Description
Source Image Select image1 or image2 as the source image.