System information

260 | Chapter 8: Monitoring the System
GS752TXS Smart Switch Software Administration Manual
System Logs
The switch may generate messages in response to events, faults, or errors occurring on the
platform as well as changes in configuration or other occurrences. These messages are
stored locally and can be forwarded to one or more centralized points of collection for
monitoring purposes or long term archival storage. Local and remote configuration of the
logging capability includes filtering of messages logged or forwarded based on severity and
generating component.
The Monitoring
 Logs tab contains links to the following folders:
• Memory Logs on page 260
• FLASH Log Configuration on page 262
• Server Log Configuration on page 263
• Trap Logs on page 265
• Event Logs on page 267
Memory Logs
The in-memory log stores messages in memory based upon the settings for message
component and severity. Use the Memory Logs page to set the administrative status and
behavior of logs in the system buffer. These log messages are cleared when the switch
reboots.
To access the Memory Log page, click the Monitoring
 Logs tab, and then click the Memory
Log link.
To configure the Memory Log settings:
1. Use the radio buttons in the Admin Status field to determine whether to log messages.
• Enable: Enables system logging.