System information

240 | Chapter 7: Managing Device Security
GS752TXS Smart Switch Software Administration Manual
To configure the IPv6 rules, select the following:
1. To add an IPv6 rule, use the pull-down list in the ACL Name field to select the IP ACL
for which to create or update a rule. Complete the fields described in the following list,
and click Add.
2. Configure the new rule.
• Rule ID: Enter a whole number in the range of 1 to 10 that will be used to identify the
rule. An IPv6 ACL may have up to 10 rules.
• Action: Specify what action should be taken if a packet matches the rule's criteria.
The choices are Permit or Deny.