System information

Chapter 7: Managing Device Security | 233
GS752TXS Smart Switch Software Administration Manual
• Rules. Displays the number of rules currently configured for the IP ACL.
• Type. Identifies the ACL as either a standard or extended IP ACL.
2. To delete an IP ACL, select the check box next to the IP ACL ID field, then click Delete.
3. To change the name of an IP ACL, select the check box next to the IP ACL ID field, update
the name, then click Apply.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
IP Rules
Use the IP Rules page to define rules for IP-based standard ACLs. The access list definition
includes rules that specify whether traffic matching the criteria is forwarded normally or
discarded.
Note: There is an implicit “deny all” rule at the end of an ACL list. This
means that if an ACL is applied to a packet and if none of the explicit
rules match, then the final implicit “deny all” rule applies and the
packet is dropped.
To display the IP Rules page, click Security
 ACL, then click the Advanced  IP Rules link. In
the following figure, an IP rule exists, and one rule has been configured.
To configure IP rules, select the following:
1. To add an IP ACL rule, use the pull-down list in the ACL ID/Name field to select the IP
ACL for which to create or update a rule. A valid range is 1 to 99. Complete the fields
described in the following list, and click Add.