System information

138 | Chapter 4: Configuring Switching Information
GS752TXS Smart Switch Software Administration Manual
To configure MLD Snooping:
1. Enable or disable the MLD Snooping Admin Mode, the administrative mode for MLD
Snooping for the switch. The default is disable.
• Multicast Control Frame Count - This displays the number of multicast control frames
that are processed by the CPU.
• Interfaces Enabled for MLD Snooping - This displays a list of all the interfaces
currently enabled for MLD Snooping.
• Data Frames Forwarded by the CPU - This displays the number of data frames
forwarded by the CPU.
2. VLAN IDs Enabled For MLD Snooping - This displays VLAN IDs enabled for MLD
snooping.
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
4. If you make any changes to the page, click Apply to apply the changes to the system.
5. Click Refresh to update the page with the latest information from the switch.
MLD Interface Configuration
MLD snooping can be enabled on the interfaces (physical and lag).
To access the MLD Snooping Configuration page, click Switching
 Multicast  MLD
Snooping
 Interface Configuration.