User Manual
Table Of Contents
- GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
- Contents
- 1. Getting Started
- Getting Started with the Smart Switches
- Switch Management Interface
- Connecting the Switch to the Network
- Switch Discovery in a Network with a DHCP Server
- Switch Discovery in a Network without a DHCP Server
- Configuring the Network Settings on the Administrative System
- Web Access
- Smart Control Center Utilities
- Understanding the User Interfaces
- Interface Naming Convention
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintaining the System
- 9. Accessing Help
- A. Hardware Specifications and Default Values
- B. Configuration Examples
- C. Notification of Compliance
- Index
84
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
From the Interface menu, select the interface with the information to view. The following table
describes the LLDP-MED network policy information that displays on the screen.
Field Description
Device Information
Chassis ID Subtype Identifies the type of data the local switch displays in the Chassis ID field.
Chassis ID Identifies the local 802 LAN switch.
System Name Identifies the system name associated with the switch.
System Description Provides a description of the switch, which is its model number.
System Capabilities Specifies the system capabilities of the switch.
Port Information
Network Policy Number Specifies the policy number.
Application Specifies the media application type associated with the policy. Only the
Voice application type is supported. The application type that is received on
the interface has the VLAN ID, priority, DSCP, tagged bit status and
unknown bit status. This information is displayed only if a network policy TLV
has been transmitted.
VLAN ID Specifies the VLAN ID associated with the policy.
VLAN Type Specifies whether the VLAN associated with the policy is tagged or
untagged.
User Priority Specifies the priority associated with the policy.
DSCP Specifies the DSCP associated with a particular policy type.
Click Refresh to update the page with the most current data from the switch.