User Manual
Table Of Contents
- GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
- Contents
- 1. Getting Started
- Getting Started with the Smart Switches
- Switch Management Interface
- Connecting the Switch to the Network
- Switch Discovery in a Network with a DHCP Server
- Switch Discovery in a Network without a DHCP Server
- Configuring the Network Settings on the Administrative System
- Web Access
- Smart Control Center Utilities
- Understanding the User Interfaces
- Interface Naming Convention
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintaining the System
- 9. Accessing Help
- A. Hardware Specifications and Default Values
- B. Configuration Examples
- C. Notification of Compliance
- Index
57
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
Green Ethernet Summary
This page summarizes the Green Ethernet Summary settings currently in use.
To access this page, click System
Management Green Ethernet Green Ethernet
Summary.
The following table describes the information available on the Green Mode Statistics
Summary page.
Field Description
Current Power Consumption
by all ports in Stack
(mWatts)
Estimated Power Consumption by all ports in the stack in mWatts.
Estimated Percentage
Power Saving per stack (%)
Estimated Percentage Power saved on all ports in the stack due to Green
mode(s) enabled.
Cumulative Energy Saving
per Stack (Watts*Hours)
Estimated Cumulative Energy saved per stack in (Watts × Hours) due to all
green modes enabled.