User Manual
Table Of Contents
- GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
- Contents
- 1. Getting Started
- Getting Started with the Smart Switches
- Switch Management Interface
- Connecting the Switch to the Network
- Switch Discovery in a Network with a DHCP Server
- Switch Discovery in a Network without a DHCP Server
- Configuring the Network Settings on the Administrative System
- Web Access
- Smart Control Center Utilities
- Understanding the User Interfaces
- Interface Naming Convention
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintaining the System
- 9. Accessing Help
- A. Hardware Specifications and Default Values
- B. Configuration Examples
- C. Notification of Compliance
- Index
300
A
A. Hardware Specifications and
Default Values
Switch Specifications
The GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches conform to
the TCP/IP, UDP, HTTP, ICMP, TFTP, DHCP, IEEE 802.1D, IEEE 802.1p, and IEEE 802.1Q
standards.
GS728TS Specifications
Feature Value
Interfaces 24 copper 10/100/1000M Ethernet ports
2 combo ports: 10/100/1000M copper or 1G/100M optical
2 SFP 1G optical ports (port 25 and 26)
2 SFP ports (port 27 and 28) for 1G optical uplink or 2.5G optical stacking
Flash memory size 32 MB
SRAM size and type 128MB DDR2 SDRAM
GS728TPS Specifications
Feature Value
Interfaces 24 copper 10/100/1000M PoE Ethernet ports (8 PoE+)
2 combo ports: 10/100/1000M copper or 1G/100M optical
2 SFP 1G optical ports (port 25 and 26)
2 SFP ports (port 27 and 28) for 1G optical uplink or 2.5G optical stacking
Flash memory size 32 MB
SRAM size and type 128MB DDR2 SDRAM