User Manual
Table Of Contents
- GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
- Contents
- 1. Getting Started
- Getting Started with the Smart Switches
- Switch Management Interface
- Connecting the Switch to the Network
- Switch Discovery in a Network with a DHCP Server
- Switch Discovery in a Network without a DHCP Server
- Configuring the Network Settings on the Administrative System
- Web Access
- Smart Control Center Utilities
- Understanding the User Interfaces
- Interface Naming Convention
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintaining the System
- 9. Accessing Help
- A. Hardware Specifications and Default Values
- B. Configuration Examples
- C. Notification of Compliance
- Index
280
8
8. Maintaining the System
Use the features available from the Maintenance tab to help you manage the switch. The
Maintenance tab contains links to the following features:
• Reset on page 280
• Upload File From Switch on page 282
• Download File To Switch on page 284
• File Management on page 288
• Troubleshooting on page 292
Reset
The Reset menu contains links to the following options:
• Device Reboot on page 280
• Factory Default on page 281
Device Reboot
Use the Device Reboot page to reboot a switch. If you are managing a stack of switches, you
can use this page to reboot any stack member.
To access the Device Reboot page, click Maintenance > Reset > Device Reboot.