User Manual
Table Of Contents
- GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
- Contents
- 1. Getting Started
- Getting Started with the Smart Switches
- Switch Management Interface
- Connecting the Switch to the Network
- Switch Discovery in a Network with a DHCP Server
- Switch Discovery in a Network without a DHCP Server
- Configuring the Network Settings on the Administrative System
- Web Access
- Smart Control Center Utilities
- Understanding the User Interfaces
- Interface Naming Convention
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintaining the System
- 9. Accessing Help
- A. Hardware Specifications and Default Values
- B. Configuration Examples
- C. Notification of Compliance
- Index
197
6
6. Managing Device Security
Use the features available from the Security tab to configure management security settings for
port, user, and server security. The Security tab contains links to the following features:
• Management Security Settings on page 197
• Configuring Management Access on page 210
• Port Authentication on page 218
• Traffic Control on page 225
• Configuring Access Control Lists on page 234
Management Security Settings
From the Management Security Settings page, you can configure the login password,
Remote Authorization Dial-In User Service (RADIUS) settings, Terminal Access Controller
Access Control System (TACACS+) settings, and authentication lists.
To display the page, click the Security > Management Security tab. The Management
Security folder contains links to the following features:
• Change Password on page 198
• RADIUS Configuration on page 199
• Configuring TACACS+ on page 204
• Authentication List Configuration on page 207