User Manual
Table Of Contents
- GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
- Contents
- 1. Getting Started
- Getting Started with the Smart Switches
- Switch Management Interface
- Connecting the Switch to the Network
- Switch Discovery in a Network with a DHCP Server
- Switch Discovery in a Network without a DHCP Server
- Configuring the Network Settings on the Administrative System
- Web Access
- Smart Control Center Utilities
- Understanding the User Interfaces
- Interface Naming Convention
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintaining the System
- 9. Accessing Help
- A. Hardware Specifications and Default Values
- B. Configuration Examples
- C. Notification of Compliance
- Index
101
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
6. If required, use the Recurrence Pattern and Daily Mode fields to customize the power
shutdown schedule. These fields are available only if the scheduler type is periodic.
7. Click Add to add the new entry to the selected timer schedule.
8. Click Delete to remove the selected entry from the timer schedule.
9. Click Apply to update the settings for an entry.
10. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
Note: Each timer can contain a maximum of one Absolute schedule entry
and ten Periodic schedule entries.