User Manual
Table Of Contents
- 24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
- Contents
- 1 Get Started
- Available publications
- Switch management options and default management mode
- Manage the switch by using the device UI
- About on-network and off-network access
- Access the switch on-network and connected to the Internet
- Use se a Windows-based computer to access the switch on-network and connected to the Internet
- Use the NETGEAR Insight mobile app to discover the IP address of the switch
- Use the NETGEAR Switch Discovery Tool to discover the switch when it is connected to the Internet
- Discover the switch in a network with a DHCP server using the Smart Control Center
- Use other options to discover the switch IP address
- Access the switch on-network when you know the switch IP address
- Access the switch off-network and not connected to the Internet
- Credentials for the device UI
- Register the switch
- Change the language of the device UI
- Change the management mode of the switch
- Use the Device View of the device UI
- Configure interface settings
- Access the NETGEAR support website
- Access the user manual online
- 2 Configure System Information
- View or define system information
- Configure the IP network settings for management access
- Configure the time settings
- Configure denial of service settings
- Configure DNS settings
- Configure green Ethernet settings
- Use the Device View
- Configure Power over Ethernet
- Configure SNMP
- Configure Link Layer Discovery Protocol
- Configure a DHCP L2 relay
- Configure DHCP snooping
- Configure Dynamic ARP Inspection
- Set up PoE timer schedules
- 3 Configure Switching
- Configure the port settings and maximum frame size
- Configure link aggregation groups
- Configure VLANs
- Configure a voice VLAN
- Configure Auto-VoIP
- Configure Spanning Tree Protocol
- Configure multicast
- Manage IGMP snooping
- Configure IGMP snooping
- Configure IGMP snooping for interfaces
- View, search, or clear the IGMP snooping table
- Configure IGMP snooping for VLANs
- Modify IGMP snooping settings for a VLAN
- Disable IGMP snooping on a VLAN and remove it from the table
- Configure one or more IGMP multicast router interfaces
- Configure an IGMP multicast router VLAN
- IGMP snooping querier overview
- Configure an IGMP snooping querier
- Configure an IGMP snooping querier for VLANs
- Display the status of the IGMP snooping querier for VLANs
- Manage MLD snooping
- Enable MLD snooping
- Configure MLD snooping for interfaces
- Configure the MLD VLAN settings
- Modify the MLD snooping settings for a VLAN
- Remove MLD snooping from a VLAN
- Configure one or more MLD multicast router interfaces
- Configure an MLD multicast router VLAN
- Configure an MLD snooping querier
- Configure the MLD snooping querier VLAN settings
- Configure multicast VLAN registration
- View, search, and manage the MAC address table
- Configure Layer 2 loop protection
- 4 Configure Routing
- 5 Configure Quality of Service
- 6 Manage Device Security
- Change the device admin password for the device UI
- Manage the RADIUS settings
- Configure the TACACS+ settings
- Configure authentication lists
- Manage the Smart Control Center
- Configure management access
- Control access with profiles and rules
- Configure port authentication
- Set up traffic control
- Configure access control lists
- Use the ACL Wizard to create a simple ACL
- Configure a MAC ACL
- Configure MAC ACL rules
- Configure MAC bindings
- View or delete MAC ACL bindings in the MAC binding table
- Configure a basic or extended IPv4 ACL
- Configure rules for a basic IPv4 ACL
- Configure rules for an extended IPv4 ACL
- Configure an IPv6 ACL
- Configure rules for an IPv6 ACL
- Configure IP ACL interface bindings
- View or delete IP ACL bindings in the IP ACL binding table
- Configure VLAN ACL bindings
- 7 Monitor the Switch and the Traffic
- 8 Maintain or Troubleshoot the switch
- A Configuration Examples
- B Specifications and Default Settings
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
User Manual7
Configure SNMPv1 and SNMPv2 trap settings. . . . . . . . . . . . . . . . . . . 105
Configure SNMPv1 and SNMPv2 trap flags . . . . . . . . . . . . . . . . . . . . . 108
View the supported MIBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Configure SNMPv3 users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Configure Link Layer Discovery Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Configure LLDP global settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Configure LLDP port settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
View the LLDP-MED network policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Configure the LLDP-MED port settings . . . . . . . . . . . . . . . . . . . . . . . . . 117
View the local information advertised through LLDP . . . . . . . . . . . . . 118
View the LLDP neighbors information . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Configure a DHCP L2 relay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
Enable the DHCP L2 relay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Configure a DHCP L2 relay interface . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
View DHCP L2 relay interface statistics . . . . . . . . . . . . . . . . . . . . . . . . . 127
Configure DHCP snooping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Configure the global DHCP snooping settings . . . . . . . . . . . . . . . . . . 129
Enable DHCP for all member interfaces of a VLAN . . . . . . . . . . . . . . . 130
Configure DHCP snooping interface settings. . . . . . . . . . . . . . . . . . . . 131
Configure static DHCP bindings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Configure DHCP snooping persistent settings. . . . . . . . . . . . . . . . . . . 134
View or clear DHCP snooping statistics . . . . . . . . . . . . . . . . . . . . . . . . . 136
Configure Dynamic ARP Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137
Configure the global DAI settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Configure DAI on a VLAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Configure DAI on an interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Configure a DAI ACL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
View DAI Statistics per VLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Set up PoE timer schedules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146
Create a PoE timer schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Specify the settings for an absolute PoE timer schedule . . . . . . . . . . 147
Specify the settings for a recurring PoE timer schedule . . . . . . . . . . . 149
Change the settings for a recurring PoE timer schedule entry . . . . . 151
Delete a PoE timer schedule entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Delete a PoE timer schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Chapter 3 Configure Switching
Configure the port settings and maximum frame size. . . . . . . . . . . . . . . 155
Configure link aggregation groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
Configure LAG settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Configure LAG membership . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Set the LACP system priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Set the LACP port priority settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Configure VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164
Configure VLAN settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Configure VLAN membership . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
View the VLAN status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Configure the PVID settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172