User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Configure System Information User Manual67
7. Select the Clock Source Local radio button.
8. In the Date field, specify the current date in months, days, and years (MM/DD/YYYY).
9. In the T
ime field, specify the current time in hours, minutes, and seconds (HH:MM:SS).
Note: If you do not enter a date and time, the switch calculates the date and
time using the CPU’s clock cycle.
10. In the Time Zone Name field, specify a time zone.
In the Offset Hours
and Offset Minutes fields, you can also specify the number of hours
and number of minutes that the time zone is different from the Coordinated Universal
Time (UTC).
The time zone can affect the display of the current system time. The default
value is UTC.
11. In the Offset Hours field, specify the number of hours that the time zone is different from
UTC.
The allowed range is –12 to 13.
The default value is 0.
12. In the Offset Minutes field, specify the number of minutes that the time zone is different
from UTC.
The allowed range is 0 to 59.
The default value is 0.
13. Click the Apply button.
Your settings are saved.
Configure the time settings with SNTP and configure the
global SNTP settings
To configure the time by using SNTP and configure the global SNTP settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.