User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Configure System Information User Manual61
Configure the IP network settings for
management access
You can configure network information for the device UI, which is the logical interface used
for in-band connectivity with the switch through any of the switch’s front-panel ports. The
settings associated with the device UI do not affect the configuration of the front panel ports
through which traffic is switched or routed.
Configure the IPv4 network and VLAN settings for the
device UI
You can configure the IPv4 network information for the device UI, which is the logical
interface used for in-band connectivity with the switch through any of the switch’s front-panel
ports.
To configure the IPv4 network and VLAN settings for the device UI:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 21 or Access the switch off-network and not
connected to the Internet on page 29.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 32.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
File Size The size, in bytes, of the file stored in the USB flash drive.
Modification Time The last modification time of the file stored in the USB flash drive.
Table 11. USB directory details information
Field Description