User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Configure System Information User Manual53
6. Define the following fields:
• System Name. Enter the name to identify this switch. Y
ou can use up to 255
alphanumeric characters. The default is blank.
• System Location. Enter the location of this switch. Y
ou can use up to 255
alphanumeric characters. The default is blank.
• System Contact. Enter the contact person for this switch. Y
ou can use up to 255
alphanumeric characters. The default is blank.
7. Click the Apply button.
Your settings are saved.
The following table describes the status information that the System Information page
displays.
Table 5. System Information
Field Description
Product Name The product name of this switch.
Serial Number The serial number of the switch.
System Object OID The base object ID for the switch's enterprise MIB.
Date & Time The current date and time.
System Up Time The time in days, hours, and minutes since the last switch reboot.
Base Mac Address Universally assigned hardware address of the switch.
View the fan status
You can view the status of the fans in all units. These fans remove the heat generated by the
power, CPU, and other components, and allow the switch to function normally.
To view the fan status:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 21 or Access the switch off-network and not
connected to the Internet on page 29.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 32.