User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Maintain or Troubleshoot the switch User Manual492
The default is the IPv4 address 0.0.0.0.
11. In the T
ransfer File Path field, specify the path on the TFTP server where the file is located.
Enter up to 160 characters. Include the backslash at the end of the path. A path name
with a space is not accepted. Leave this field blank to save the file to the root
TFTP
directory.
12. In the Remote File Name field, specify the name of the file to download from the
TFTP
server.
You can enter up to 32 characters. A file name with a space is not accepted.
13. Select the Start File T
ransfer check box to initiate the file upload.
14. Click the Apply button.
The file transfer begins.
The page displays information about the progress of the file transfer. The page refreshes
automatically when the file transfer completes.
Note: After you download a text configuration file, the switch applies the
configuration automatically.
15. After you download a software image file, if you want the switch to run the software image,
do the following:
a. Select the new software image file (see
Change the software image that loads when
the switch starts or reboots on page 499).
b. Reboot the switch (see
Reboot the switch on page 481).
Use HTTP to download a file to the switch or update the
software image
You can download a software (firmware) image, configuration files, and SSL files from a
computer to the switch by using an HTTP session over a web browser.
To download a file to the switch using HTTP:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 21 or Access the switch off-network and not
connected to the Internet on page 29.
The Device UI login page displays.