User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Maintain or Troubleshoot the switch User Manual489
7. From the File Type menu, select the type of file:
• Text Configuration. A text-based configuration file enables you to edit a configured
text file (
startup-config) offline as needed. The most common usage of
text-based configuration is to upload a working configuration from a device, edit it
offline to personalize it for another similar device (for example, change the device
name or IP address), and download it to that device.
8. In the File Path field, enter the path for the file to upload.
You can use up to 139 characters. The default is blank.
9. In the USB File field, enter a name along with path for the file to upload.
You can enter up to 32 characters. The default is blank.
10. Click the Apply button.
The file transfer begins.
The page displays information about the file transfer progress. The page refreshes
automatically when the file transfer completes (or if it fails).
Download a file to the switch or update the
software
You can download system files from a remote system to the switch by using either TFTP or
HTTP. In this context, downloading is also referred to as updating.
The following sections describe how you can download a file to the switch:
•
Use TFTP to download a file to the switch or update the software image on page 490
• Use HTTP to download a file to the switch or update the software image on page 492
• Use an HTTP session to download and install an SSL security certificate file on the
switch on page 494
• Download a file from a USB device on page 496
Note: Use one of these procedures to update the software (firmware) on the
switch.