User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Monitor the Switch and the Traffic User Manual469
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 21 or Access the switch off-network and not
connected to the Internet on page 29.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 32.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 30.
5. Click the Go button.
The System Information page displays.
6. Select Monitoring > Logs > Memory Log.
The Memory Log page displays.
7. Select one of the following
Admin Status radio buttons:
• Enable. Enable system logging.
• Disable. Prevent the system from logging messages.
8. From the Behavior menu, specify the behavior of the log when it is full.
• Wrap. When the buf
fer is full, the oldest log messages are deleted as the system logs
new messages.
• Stop on Full. When the buf
fer is full, the system stops logging new messages and
preserves all existing log messages.
9. From the Severity Filter menu, select one of the following severity levels:
• Emergency (0). System is unusable.
• Alert (1).
Action must be taken immediately.
• Critical (2). Critical conditions.
• Error (3). Error conditions.
• Warning (4). W
arning conditions.
• Notice (5). Normal but significant conditions.
• Informational (6). Informational messages.
• Debug (7). Debug-level messages.
Note: A log records messages equal to or above a configured severity
threshold.