User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Monitor the Switch and the Traffic User Manual458
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see Register the switch on page 32.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 30.
5. Click the Go button.
The System Information page displays.
6. Select Monitoring
 Ports > Port Statistics.
The Port Statistics page displays.
7. Select whether to display physical interfaces, link aggregation groups (LAGs), or both by
clicking one of the following links above the table heading:
•1 (or the unit ID of the switch). Only physical interfaces are displayed.
This is the
default setting.
• LAG. Only link aggregation groups are displayed.
• All. Both physical interfaces and link aggregation groups are displayed.
8. T
o locate an interface quickly, type the interface number using the respective naming
convention (for example, g1 or l1) in the Go To Interface field above or below the table and
click the Go button.
The entry corresponding to the specified interface is selected.
9. Click the Clear button.
The counters for the interface are reset to 0.
View and manage detailed port statistics
You can view a variety of per-port traffic statistics.
To view or clear detailed port statistics:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.