User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Get Started User Manual43
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the device UI on page 30.
5. Click the Go button.
The System Information page displays.
6. Select System > Device V
iew.
The Device V
iew page displays.
The following figure shows the Device View page for model GS728TPPv2.
The system LEDs display on the left side on the Device View page.
Depending upon the status of the port, the port color on the Device View page is either
green or black:
• Green indicates that the port is linking up.
• Black indicates that no link is present.
Each port also provides one LED on the Device View page to indicate the link status of
the port:
• A green LED indicates that the port is linking at a speed of 1 Gbps.
• A yellow LED indicates that the port is linking at a speed of 10 Mbps or 100 Mbps.
7. T
o display a port menu that shows configuration and statistics options, click a port.
Y
ou can select a menu option to access the page that contains the configuration or
monitoring options.
8. To display the main menu, right-click the switch graphic but do not right-click a specific port.
The menu contains the same options as the navigation tabs at the top of the page.
You
can select a menu option to access the page that contains the configuration or monitoring
options.
The following figure shows the details on the Device View page for model GS728TPPv2.