User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Get Started User Manual42
The file transfer begins. The page displays information about the progress of the file
transfer. The switch applies the configuration automatically.
14. Reboot the switch:
a. Select Maintenance > Reset > Device Reboot.
The Device Reboot page displays.
b. Select the check box.
c. Click the Apply button.
An Alert pop-up window displays.
d. Click the OK button to confirm.
The switch reboots.
The Device UI login page displays.
15. Log in again.
The System Information page displays. You can now configure the switch using all
options in the device UI.
Use the Device View of the device UI
The Device View displays the ports on the switch. This graphic tool provides an alternate way
to navigate to configuration and monitoring options. The graphic tool also provides
information about device ports, configuration and status, tables, and feature components.
To use the Device View:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 21 or Access the switch off-network and not
connected to the Internet on page 29.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 32.
4. Enter one of the following passwords:
• Enter your device admin password.