User Manual

Table Of Contents
24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Manage Device Security User Manual419
2. Create an IPv4 rule (see Configure rules for a basic IPv4 ACL on page 422 or
Configure rules for an extended IPv4 ACL on page 427).
3. Associate the IPv4
ACL with one or more interfaces (see Configure IP ACL interface
bindings on page 445).
You can view or delete IPv4 ACL configurations in the IP ACL Binding table (see
View or
delete IP ACL bindings in the IP ACL binding table on page 447.
Add an IP ACL
To add an IP ACL:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 21 or Access the switch off-network and not
connected to the Internet on page 29.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 32.
4. Enter one of the following passwords:
Enter your device admin password.
If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 30.
5. Click the Go button.
The System Information page displays.
6. Select Security >
ACL > Advanced > IP ACL.