User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Get Started User Manual40
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 21 or Access the switch off-network and not
connected to the Internet on page 29.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 32.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 30.
5. Click the Go button.
The System Information page displays.
6. Select the Directly Connect to W
eb Browser Interface radio button.
An Alert pop-up window displays.
7. Read the text, and click the OK button.
The pop-up window closes.
8. Click the Apply button.
Another pop-up window displays.
9. Click the OK button.
The pop-up window closes, the System Information page closes, and your settings are
saved.
Any current Insight-manageable device settings are saved to the cloud server.
The Device UI login page displays.
10. Log in again.
The System Information page displays.
Note: The following step uses an HTTP session to back up the configuration.
For information about using a TFTP session, see
Use TFTP to export a
file from the switch to a TFTP server on page 485.
11. Back up the configuration:
a. Select Maintenance > Export > HTTP File Export.
The HTTP File Export page displays.
b. From the File T
ype menu, select Text Configuration.
c. Click the Apply button.