User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Get Started User Manual39
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 30.
5. Click the Go button.
The System Information page displays.
6. Select the NETGEAR Insight Mobile
App and Insight Cloud Portal radio button.
An Alert pop-up window displays.
7. Read the text, and click the OK button.
The pop-up window closes.
8. Click the Apply button.
Another pop-up window displays.
9. Click the OK button.
The pop-up window closes, the System Information page closes, and your settings are
saved.
The following occurs:
• The first time that you enable this mode, the switch is reset to its factory default
settings.
• The switch connects to the cloud server
.
• If you previously added the switch to a network on the Insight app or Insight Cloud
portal, all Insight-manageable device settings are returned to the last configuration
saved on the cloud server
, including the device admin password (that is, the
password is reset to the Insight network password).
• The Device UI login page might display again. (Y
ou can close the page.)
You can now manage the switch using the Insight app or Insight Cloud portal.
For more information about NETGEAR Insight, visit
netgear.com/insight and
netgear.com/support/product/Insight.aspx. For knowledge base articles about NETGEAR
Insight, visit
netgear.com/support.
Change the management mode back to Directly Connect
to Web-browser Interface
To change the management mode of the switch back to Directly Connect to Web
Browser Interface:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.