User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Manage Device Security User Manual388
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see Register the switch on page 32.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 30.
5. Click the Go button.
The System Information page displays.
6. Select Security > T
raffic Control > Port Security > Port Security Configuration
.
7. To enable port security on the switch, select the Port Security Mode Enable radio button.
The default is Disable.
8. Click the Apply button.
Your settings are saved.
9. Click the Refresh button to refresh the page with the latest information about the switch.
The Port Security Violations table shows information about violations that occurred on ports
that are enabled for port security
.
The following table describes the fields in the Port Security V
iolations table.
Table 79. Port Security Violations information
Field Description
Port The physical interface.
Last Violation MAC The source MAC address of the last packet that was discarded at a locked port.
VLAN ID The VLAN ID corresponding to the last MAC address violation.