User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Manage Device Security User Manual380
Set up traffic control
You can configure MAC filters, storm control, port security, protected port, and private VLAN
settings.
Manage MAC filtering
You can create MAC filters that limit the traffic allowed into and out of specified ports on the
switch.
Create a MAC filter
If a packet with a MAC address and VLAN ID that you specify for a filter is received on a port
that is not part of the inbound filter, the packet is dropped.
A packet with a MAC address and VLAN ID that you specify for a filter can be transmitted
only from a port that is part of the outbound filter.
To create a MAC filter:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 21 or Access the switch off-network and not
connected to the Internet on page 29.
The Device UI login page displays.
Supplicant Mac Address The supplicant’s device MAC address.
Session Time The time since the supplicant logged in seconds.
Filter ID The policy filter ID assigned by the authenticator to the supplicant device.
VLAN ID The VLAN ID assigned by the authenticator to the supplicant device.
VLAN Assigned The reason for the VLAN ID assigned by the authenticator to the supplicant device.
Session Timeout The session time-out imposed by the RADIUS server on the supplicant device.
Termination Action The termination action imposed by the RADIUS server on the supplicant device.
Table 77. Client Summary information (continued)
Field Description