User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Manage Device Security User Manual363
10. In the Remote File Path field, enter the path of the file to download.
You can enter up to 96 characters. The default is blank.
11. In the Remote File Name field, enter the name of the file on the
TFTP server to download.
You can enter up to 32 characters. The default is blank.
12. Select the Start File T
ransfer check box.
13. Click the Apply button.
The file transfer starts. A status message displays during the transfer and upon
successful completion of the transfer
.
Control access with profiles and rules
Access control allows you to configure an access control profile and set rules for access to
the device UI, access by SNMP stations, and client access to a TFTP server. We refer to an
access control profile as an access profile. You can add a single access profile, which you
can configure, activate, or deactivate.
CAUTION:
If you configure a security access profile incorrectly and you activate the
access profile, you might no longer be able to access the switch’s device
UI. If that situation occurs, you must reset the switch to factory default
settings (see
Reset the switch to its factory default settings on page 482).
Add an access profile
You can set up a single security access profile with which you can associate an access rule
configuration.
To add an access profile:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 21 or Access the switch off-network and not
connected to the Internet on page 29.
The Device UI login page displays.