User Manual

Table Of Contents

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports

Manage Device Security User Manual355

7. Select the one of the following SCC Admin Mode radio buttons:

• Enable. The SCC can discover the switch and perform actions on the switch.

•

Disable. The SCC can discover the switch but cannot perform any actions on the

switch.

This is the default setting.

8. Click the Apply button.

Your settings are saved.

Configure management access

You can configure the global settings for HTTP and secure HTTP (HTTPS) access to the

switch’s device UI. You can also configure access control profiles and access rules.

Configure the HTTP settings

You can configure the HTTP access settings on the switch. If you access the switch

device UI, HTTP is the default access method.

To configure the HTTP access settings:

1. Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or

connect directly to a switch that is off-network using an Ethernet cable.

2. Launch a web browser.

3. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see

Access the switch on-network and

connected to the Internet on page 21 or Access the switch off-network and not

connected to the Internet on page 29.

The Device UI login page displays.

If you did not yet activate your warranty, the Register to activate your warranty page

displays. For more information, see