User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Manage Device Security User Manual353
If you do not know the IP address of the switch, see Access the switch on-network and
connected to the Internet on page 21 or Access the switch off-network and not
connected to the Internet on page 29.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 32.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 30.
5. Click the Go button.
The System Information page displays.
6. Select Security > Management Security >
Authentication List > Dot1x
Authentication
List.
7. Select the check box next to the dot1xList name.
8. From the menu in the 1 column, select the method that must be used first in the selected
authentication login list.
The options are as follows:
• Radius.
The user
’s ID and password are authenticated using the RADIUS server
instead of locally.
• None. The user is not authenticated.
9. Click the Apply
button.
Your settings are saved.