User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Manage Device Security User Manual338
CAUTION:
The maximum delay in receiving a RADIUS response on the switch equals
the maximum number of retransmissions multiplied by the time-out period
multiplied by the number of configured RADIUS servers. If the RADIUS
request was generated by a user login attempt, all user interfaces are
blocked until the switch receives a RADIUS response.
7. In the Max Number of Retransmits field, specify the maximum number of times a request
packet is retransmitted to the RADIUS server
.
The range is from 1 to 15.
The default value is 4.
8. In the Timeout Duration field, specify the time-out value, in seconds, for request
retransmissions.
The range is from 1 to 30.
The default value is 5.
9. From he Accounting Mode menu, select to disable or enable RADIUS accounting on the
server.
The default is Disabled.
10. Click the Apply
button.
Your settings are saved.
The following table describes the nonconfigurable fields displayed on the page.
Table 72. RADIUS Configuration information
Field Description
Current Server Address The address of the current server. This field is blank if no servers are configured.
Number of Configured
Authentication Servers
The number of configured authentication RADIUS servers. The value can range
from 0 to 3.