User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Get Started User Manual33
If you did not yet create a NETGEAR account, click the Create account link, follow the
directions onscreen to create an account, and register the switch with your email address
and password.
For information about the credentials, see
Credentials for the device UI on page 30.
5. If the Change Default Password page displays, specify and confirm a new device admin
password, click the Submit button, and log in again with your new password.
The System Information page displays. You can now configure the switch.
Register the switch with your NETGEAR account and get a
registration key for offline access
Note: If you register your switch with your NETGEAR account and then
access the switch connected to the Internet, you do not need a
registration key because the Device UI login page displays. That is,
you are no longer prompted to activate your warranty.
After you register your switch with your NETGEAR account, you can get a registration key,
access the switch of
fline or not connected to the Internet, and either before or after you log in
to the device UI, enter the registration key. After you enter the registration key, you are no
longer prompted to activate your warranty. Instead, the Device UI login page displays.
You can visit
mynetgear.com, log in to your NETGEAR account, register the switch using its
serial number, and get a registration key.
You can also use the NETGEAR Insight app to get a registration key. NETGEAR Insight
Premium or Pro subscribers can use the Insight Cloud Portal to get a registration key. For
information about how the registration key functions with Insight, visit
netgear.com/support/product/Insight.aspx. For knowledge base articles about NETGEAR
Insight, visit
netgear.com/support.
To register the switch with your NETGEAR account and get a registration key:
1. From a computer or mobile device that is connected to the Internet, go to
mynetgear.com.
2. Log in to your NETGEAR account.
If you do not have a free NETGEAR account, you can create one.
3. From the menu on the left, select Register a Product.
The page adjusts.
4. In the Serial Number field, enter the serial number of the switch.
The serial number consists of 13 digits. The serial number is usually printed on a label on
the bottom or the back panel of the switch.
5. Click the Register button.