User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Configure Quality of Service User Manual311
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 32.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 30.
5. Click the Go button.
The System Information page displays.
6. Select QoS > DiffServ >
Advanced > Class Configuration.
7. In the Class Name field, enter a class name.
The Class Name field also lists all the existing DiffServ class names, from which you can
select one for modification or deletion.
The class name can be 1 to 31 alphanumeric
characters in length.
8. From the Class Type
menu, select the class type.
The switch supports only the class type value All, which means that all the various match
criteria defined for the class are satisfied for a packet match. All signifies the logical AND
statement of all the match criteria.
You can select the class type only when you are
creating a new class. After the class is created, the Class Type field becomes
nonconfigurable.
9. Click the Add button.
The new class is added.
10. After creating the class, click the class name.
The class name is a hyperlink to the page on which you can define the class
configuration.