User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Get Started User Manual30
a. Type or paste the key.
For more information, see Register the switch with your NETGEAR account and
get a registration key for offline access on page 33.
b. Click the Submit button.
• Do not register at this time and access the device UI: Do the following:
a. Click the Skip Registration &
Access the UI button.
The Device UI login page displays.
b. Enter one of the following credentials:
- Device admin password: Enter the device admin password. The default
device admin password is password. The first time that you enter the default
device admin password, the Change Default Password page displays,
requiring you to customize the device admin password.
- Insight network password: If you previously logged in to the device UI, you
changed the management mode to NETGEAR Insight, and you added the
switch to an Insight network location,
enter the Insight network password to
access the device UI. (In such a situation, the Insight network password
replaces the switch device admin password.)
For information about the credentials, see Credentials for the device UI on
page 30.
7. If the Change Default Password page displays, specify and confirm a new device admin
password, click the Submit button, and log in again with your new password.
The System Information page displays. You can now configure the switch.
8. After you complete the configuration of the switch, reconfigure the computer that you used
for this process to its original
TCP/IP settings.
You can now connect your switch to your network using an Ethernet cable.
Credentials for the device UI
The information in this section applies to accessing the switch device UI in either
management mode. That is, it does not apply to accessing the NETGEAR Insight app and
Cloud portal.
To access the device UI, and depending on your situation, use one of the following
credentials:
•
NETGEAR account credentials:
You can register the switch online to activate your warranty by entering your NETGEAR
account credentials (see
Register the switch with your NETGEAR account and access
the switch online on page 32). If you do not have a NETGEAR account, you can create
one.