User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
User Manual3
(continued)
202-12021-04
(continued)
April 2021
(continued)
• We changed the login steps in all tasks in the manual to document the new
device UI login options.
• We changed
Manage the Smart Control Center.
• We added
Browser security warning with HTTPS access.
• We changed
Reset the switch to factory default settings and reset the
registration status.
• We made multiple minor changes, including changes in terminology.
202-12021-03 March 2020 • We changed Reboot the switch.
• We changed
Reset the switch to its factory default settings and added the
following sections:
-
Reset the switch to factory default settings but maintain the registration
status.
-
Reset the switch to factory default settings and reset the registration
status.
202-12021-02 February 2020 • We changed the login procedures for all tasks, including the tasks for initial
access in
Chapter 1, Get Started. After you register and access the switch
with your NETGEAR account, you now can access the switch with the
device admin password. You now can also obtain and use a registration key
for offline access.
• We changed
Credentials for the device UI.
• We changed
Register the switch and added two sections:
-
Register the switch with your NETGEAR account and access the switch
online
-
Register the switch with your NETGEAR account and get a registration
key for offline access
• We changed
Reset the switch to its factory default settings.
• We added
Use an HTTP session to download and install an SSL security
certificate file on the switch.
• We changed local browser interface to device UI.
202-12021-01 August 2019 • We changed the login procedures for all tasks. After you register and access
the switch with your NETGEAR account, you can now access the switch with
the device admin password.
• The switch now supports management through the NETGEAR Insight app
and Insight Cloud portal.
• We reorganized the information in Chapter 1, Get Started and added or
revised the following sections:
-
Available publications
-
Switch management options and default management mode
-
About on-network and off-network access
-
Access the switch on-network and connected to the Internet
-
Access the switch off-network and not connected to the Internet
-
Credentials for the device UI
-
Register the switch
-
Change the language of the device UI
-
Change the management mode of the switch
-
PoE Max LED in the Device View
-
LED Mode LED in the Device View